iWL250: Configuring device settings

This article explains how to configure an iWL250 device. 

Press the Menu button (the one above the red button) and use the arrow keys to select VIKING PA and confirm with the green (OK) button (or press 2 on the keypad):

Scroll down and select ADMINMENY (or press 8 on the keypad):

Swipe the Merchant card when prompted:

Scroll down and select INSTÄLLNINGAR (or press 6 on the keypad):

Select ÄNDRA (or press 1 on the keypad):

Select FUNKTION (or press 1 on the keypad):

• Use the down key to check that the following settings are correct:
  • 1 – FUNKTION
    • Beloppsläge = Kronor (Öre)
    • S&F = Ja (Nej)
    • Serv Första = Nej (Ja)
    • Infofält = Ingen info (Ocr, Info text, Kassör ID)
    • Knappljud = VidFel (Alltid, Inget)
    • PIN knappljud = Alltid (Aldrig) // Enables/disables keypad sound)
    • Alltid Kopia = Nej (Ja)
    • Dubbelkontroll = Nej (Ja)
    • Språk = Svenska // Configures language
    • Dricks = Totalbelopp (Nej, Extrabelopp) (enables and disables tip)
    • Ändra Kassör = Utan kassör (Dagsavslut, Z-total, Alltid, O-Rapport)
    • Moms = Ingen Moms (Ingen moms, Ändra moms)
    • Momssats=0
    • Reservför. Språk = English
    • Bakgrundsljus = Auto (Alltid)
    • Chip info text = Chip uppåt (Chip mot dig, Chip ned)
• Press the red button (Stop) to move back to ÄNDRA menu

Select KOMMUNIKATION (or press 2 on the keypad):

• Use the down key to check that the following settings are correct:
  • 2 - KOMMUNIKATION
    
    • Komm. Typ= Ethernet
    • DHCP = DHCP
    • Host IP Adress = 91.102.24.142
    • Host IP Port = 9670 (9682)
• Press the red button (Stop) to move back to ÄNDRA menu

Select KASSA (or press 3 on keypad):

• Use the down key to check that the following settings are correct:
  • 3 – KASSA
    • ECR = Ja (Nej) // Enables or disables BAXI functionality
    • Komm.Typ = IP ETHERNET
    • ECR IP ADRESS = x.x.x.x // Enter the IP address of the POS sending transactions to the terminal
    • ECR IP Port = 6001 // or 6002, 6003 etc. in case there are several terminals configured on the POS device, 1 port per terminal)
    • Kortinfo = aldrig
    • Kortinfo = Aldrig (Alltid, Efter belopp)
    • Kvittohuvud/-fot = Nej (Ja)
• Press the red button (Stop) several times until the device restarts.